In the context of the \u201cParis Subway Line 1 Automation\u201d project, the SIL3 DOF1 safety system, which is independent from the automatic train system, will command the opening and closing of the landing doors installed on all the line\u2019s platforms.<\/p>\r\n\r\n\r\n\r\n
This system will be used with existing MP89 trains and will be compatible with the new automatic MP05 trains that will progressively replace the current ones<\/p>\r\n\r\n\r\n\r\n
DOF1 also prevents the train doors on the opposite side of the platform from opening.DOF1 will then be disassembled when all the automatic trains will be operation on Line 1. Then the MP89 trains will be operated on the line 4 and DOF1 will be installed on this line to enabled the correct side door, and in the future control platform screen doors.<\/p>\r\n\r\n\r\n\r\n
The DOF1 system includes an embedded portion on the train that processes the train door opening and closing commands made by the conductor and sends the command to the portion located in the platform\u2019s technical office. The command to open the door is processed and sent to the landing doors.<\/p>\r\n\r\n\r\n\r\n
The train\/ground link is allowed via a mat installed on the rails, which creates a magnetic loop with a sensor installed on the train\u2019s bogie.<\/p>\r\n\r\n\r\n\r\n
This system is Sil 4 Level safe to enable the correct side door of the train. The platform screen doors can only be opened when the train has reached the platform with a SIL3 safety level. The solution is based on Siemens SIL3 automatons.<\/p>\r\n\r\n\r\n\r\n
CLEARSY is in charge of the project and responsible for the study and manufacturing of equipment series installed throughout the line.<\/p>\r\n\r\n\r\n\r\n
CLEARSY adopted an original method to answer to the call to tender: a B model of the specifications was performed with the Composys tool, then graphically animated with the Brama tool. We were therefore able to define the needs of the RATP by transcribing our understanding of the system into a model and then validating this understanding by animating the system in various scenarios viewed on the screen. Questions could therefore be asked and a detailed response provided, as the system must be designed in only six months.<\/p>\r\n\r\n\r\n\r\n
Like the Coppilot<\/a> system, CLEARSY uses a development process that integrates the B method, from the system specifications up to the code stage.<\/p>\r\n\r\n\r\n\r\n The B models developed participate in demonstrating the system\u2019s safety and the level of availability of the system that must be very high in order to ensure fluid traffic.<\/p>\r\n\r\n\r\n\r\n\r\n\r\n The diagram above portrays the installation of the DOF1 system. It comprises 2 parts:<\/p>\r\n\r\n\r\n\r\n The first is installed in a technical zone close to the platform and is equipped with landing doors. It is called \u201cDOF1 Sol et Antenne Dof1 Sol\u201d (Ground Dof1 and Ground Dof1 Loop antenna). The second part is installed at the front and the rear of the train interior. This second part is called \u201cDOF1 Bord et Antenne Dof1 Bord\u201d (Onboard DOF1 and Onboard Dof1 Loop antenna). Communication between the train and the ground is made using a magnetic loop connection, provided by an Loop antenna comprising two pieces of equipment referred to in the plan as Onboard Dof1 loop antenna and Ground Dof1 loop antenna. Communication between the Ground Dof1 (at the platform) and the Dof1 onboard the train is only possible when the \u201cOnboard loop antenna\u201d equipment is aligned above the \u201cGround loop antenna\u201d equipment, that\u2019s to say when the train is correctly positioned in the station. The use of a magnetic loop guarantees that there is no interference with communications between the ground and a train which isn\u2019t alongside the platform. The side and ground systems communicate with each other by using a secure series protocol. The side and ground modems modulate and demodulate the digital signal in a current loop.<\/p>\r\n\r\n\r\n\r\n In this way, the dof1 system comprises:<\/p>\r\n\r\n\r\n\r\n A Ground DOF1 cabinet placed in a technical zone on each platform. It receives the opening and closing instructions emitted by the conductor and transmits them to the side of the platform. These instructions can also be received from the SAET (an automatic system, which is active when trains are on automatic pilot), and can be transmitted to the sides as well. \u201cGround DOF1 loop antenna\u201d equipment situated on the track on the ground at the beginning of the platform (at the front of the train when it is stopped at a station) to ensure doors open to the right. This equipment is aligned above the \u201cOnboard DOF1 loop antenna\u201d ground equipment when the train is correctly positioned in the station; that is to say within around 1 metre of the targeted theoretical stoppage point.<\/p>\r\n\r\n\r\n\r\n The \u201cGround DOF1 loop antenna\u201d equipment comes in the form of a belt, the dimension of which takes into account the desired stoppage zone of around two metres. Two \u201cOnboard DOF1 loop antenna\u201d equipment parts at the front and rear of the train situated on the train\u2019s bogies. These are connected to the Onboard DOF1 and ensure communication with the ground equipment.<\/p>\r\n\r\n\r\n\r\n Two Onboard DOF1 situated inside the train, which enable the conductor\u2019s instructions to be relayed as well as the reception of data from the Ground DOF1, thus ensuring the coherence of the safety instructions. The Onboard DOF1 loop antenna must be installed at the rear and the front of the train, which is operational in both directions (a train at the end of the line goes back in the opposite direction, the rear of the train becoming the front and the conductor changing cab). For \u2018standard\u2019 stations equipped with two platforms and for which the opening of the train doors is performed to the right, a single Ground DOF1 Loop antenna is installed at the front of the platform. Two loop antenna are needed for stations where both the opening of the doors and the platform are situated on the left hand side.<\/p>\r\n\r\n\r\n\r\n In the context of the \u201cParis Subway Line 1 Automation\u201d project, the SIL3 DOF1 safety system, which is independent from […]<\/p>\n","protected":false},"featured_media":14908,"template":"","secteur":[],"domaines_references":[],"class_list":["post-14802","references","type-references","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"\nDetails on the different components of the DOF1 system<\/h2>\r\n\r\n\r\n\r\n
Articles<\/h2>\r\n\r\n\r\n\r\n
\r\n